ASTM A276 304/316L Stainless Steel Round Bar Wiċċ Bright
Mar 16, 2026
Ħalli messaġġ
| Standard |
ASTM A276, ASTM A479/A479M, ASTM A484/A484M, ISO 683-13 |
|---|---|
| Grad |
00Cr17Ni14Mo2, 0Cr18Ni12Mo2Ti, 1.4404, SUS316L, X2CrNiMo17-12-2 |
| Tul |
Personalizzat |
| Dijametru |
3 mm sa 500 mm (0.12-19.7 in), Personalizzat |
| Forma |
Angle Bar, Channel Bar, Personalizzat, Ċatt, Eżagonali, Rettangolari, Tond, Kwadru, T-Bar |
| Finish tal-wiċċ |
2B, BA, Iswed, Brushed, Personalizzat, Imqaxxar, Illustrat |
| Teknika |
Cold Drawn, Cold Rolled, Hot Rolled |
| Formola |
Bar f'diversi forom, Cold-Bars rfinuti, Personalizzat, Bar ċatt, Bars falsifikati, Bar vojta, Hot-Bar irrumblat, Virga, Bar tond, Bar bil-kamin |
Kompożizzjonijiet Kimiċi
| Karbonju (C) | Silikon (Si) | Manganiż (Mn) | Fosfru (P) | Kubrit (S) | Kromju (Cr) | Nikil (Ni) | Molibdenu (Mo) | Nitroġenu (N) |
|---|
| Inqas minn jew ugwali għal 0.03 | Inqas minn jew ugwali għal 0.75 | Inqas minn jew ugwali għal 2.00 | Inqas minn jew ugwali għal 0.045 | Inqas minn jew ugwali għal 0.030 | 16.0 – 18.0 | 10.0 – 14.0 | 2.0 – 3.0 | Inqas minn jew ugwali għal 0.10 |
Proprjetajiet Mekkaniċi
| Proprjetajiet | Unità Metrika | Unità Imperjali |
|---|
| Qawwa tat-tensjoni | 485 – 620 MPa | 70 – 90 ksi |
| Qawwa tar-Rendiment | 170 – 310 MPa | 25 – 45 ksi |
| Ebusija Vickers | 150 – 200 HV | 150 – 200 HV |
| Ebusija Brinell | 146 – 217 HB | 146 – 217 HB |
| Ebusija Rockwell | B80 – C20 | B80 – C20 |
| Titwil | 40% – 50% | 40% – 50% |
| Modulu Elastiku | 193 – 200 GPa | 28 – 29 x 10^6 psi |
Par ta ' l-:X'inhu 1.4462 Stainless Steel?
Li jmiss: X'inhu 1.4547 Stainless Steel?
Ibgħat l-inkjesta